Pelletimasina väljalaskekiirust mõjutavad tegurid
1, the inside of the pellet machine has not changed the lubricant for a long time, so that the pressure wheel becomes more heavy, the rotation is more difficult, the rotation is fast and slow, so that it will cause the discharge instability. In order to avoid this situation in the daily processing and production process, the operator should regularly add lubricants to the pressure wheel inside the machine.
2. Uneven water content of materials. Under normal circumstances, when the material with uniform water content is processed and produced, it stays in the particle machine inside the material water is evaporated at the same time, so the discharge is uniform. If the water content of the material is not uniform, then it will cause the evaporation of the material of water, the grain speed is not uniform phenomenon, this situation can be solved by adjusting the water content of the material. From this point of view, when the material is drying this link, it must be carried out in strict accordance with the requirements of granulation, and remember that the water content of the material must be controlled within 8-15 percent during granulation.
3, when the transmission parts of the pellet machine are seriously worn, it will also cause the discharge to be fast and slow, then it is necessary to replace the damaged parts.Kui ülaltoodud kolm olukorda teie probleemi ei lahenda, võtke meiega ühendust, arutame üksikasjalikult.